IJE TRANSACTIONS A: Basics Vol. 31, No. 1 (January 2018) 181-187   

PDF URL: http://www.ije.ir/Vol31/No1/A/24-2678.pdf  
downloaded Downloaded: 67   viewed Viewed: 1250

S. S. Tabatabaee Moradi, N. I. Nikolaev and E. L. Leusheva
( Received: August 31, 2017 – Accepted in Revised Form: November 30, 2017 )

Abstract    Cementing of the casing pipes inside the wellbore is considered as one of the most expensive and difficult operations during the well construction process. A low quality cementing job leads to further repair operations, which are usually costly and time-consuming to conduct. Polymer cements are being used for decades in the oil and gas industry due to their improved properties such as sedimentation stability, flexural strength and adhesion. Furthermore, these cements are characterized by improved pore structure, decreased slurry density, decreased porosity and controllable rheological parameters. In this research, a single domestic polymer is added as a cement modifying agent. Domestic additive are easier to buy in the market and are usually cheaper than the imported additives. In addition, using a single additive leads to a simplified logistics operation. Results of the experimental investigations on the main properties of the developed cement systems show that using the proposed polymer in the proper concentration leads to an optimum flow-ability and pump-ability of the slurry, reduced cement water loss, increased strength characteristics and improved adhesion properties of the set cement.


Keywords    Well construction, Cement, Polymer additive, Multi-functional additive.


چکیده    سیمان کاری لوله های جداری داخل چاه، به عنوان یکی از گران ترین و سخت ترین عملیات ها در طول فرآیند ساخت چاه به شمار می رود. یک سیمان کاری با کیفیت پایین منجر به عملیات های تعمیری می شود که معمولا گران و زمان بر هستند. سیمان های پلیمری به دلیل خواص بهبود یافته نظیر پایداری رسوبی، مقاومت خمشی و چسبندگی برای دهه ها در صنعت نفت و گاز مورد استفاده قرار می گیرند. علاوه بر این، این سیمان ها با خصوصیاتی نظیر فضای متخلل بهبود یافته، دوغاب سیمان با چگالی کمتر، تخلل کمتر و ویژگی های رئولوژیکی قایل کنترل، متمایز می شوند. در این پژوهش از یک پلیمر داخلی به عنوان عامل بهبود دهنده خواص سیمان استفاده شده است. افزودنی های داخلی معمولا راحت تر برای خریدن در بازار و ارزان تر از افزودنی های وارداتی می باشند. علاوه بر این، استفاده از تنها یک افزودنی به یک عملیات لجستیکی ساده تر منجر می گردد. نتایج بررسی های آزمایشگاهی بر روی خواص اصلی سیمان های توسعه یافته نشان می دهد که استفاده از پلیمر پیشنهادی در غلظت مناسب باعث قابلیت جریان پذیری و پمپ پذیری بهینه دوغاب، آب آزاد کاهش یافته سیمان، خواص مقاومتی افزایش یافته و چسبندگی بهتر سنگ سیمان می شود.


1.      Moradi, S.T. and Nikolaev, N.I., "Considerations of well cementing materials in high-pressure, high-temperature conditions", International Journal of Engineering, Transactions C: Aspects, Vol. 29, No. 9, (2016), 1214-1218.

2.      Brandl, A., Cutler, J., Seholm, A., Sansil, M. and Braun, G., "Cementing solutions for corrosive well environments", SPE Drilling & Completion,  Vol. 26, No. 02, (2011), 208-219.

3.      Ilyas, M., Sadiq, N., Mughal, M.A., Pardawalla, H. and Noor, S.M., "Improvement of cementing in deep wells", in SPE/PAPG Annual Technical Conference, Society of Petroleum Engineers. (2012).

4.      Chougnet, A., Audibert-Hayet, A., Lecolier, E., Moan, M., Guichard, B., Mazard, C. and Valenti, A., "Polymer powder/cement composites for oil and gas wells", in SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers., (2006).

5.      Chung, D., "Use of polymers for cement-based structural materials", Journal of materials science,  Vol. 39, No. 9, (2004), 2973-2978.

6.      Reddy, B.R., Patil, R. and Patil, S., "Chemical modification of biopolymers to design cement slurries with temperature-activated viscosification--a laboratory study", SPE Drilling & Completion,  Vol. 27, No. 01, (2012), 94-102.

7.      Roshan, H. and Asef, M., "Characteristics of oilwell cement slurry using cmc", SPE Drilling & Completion,  Vol. 25, No. 03, (2010), 328-335.

8.      Brandl, A., Bray, W.S. and Magelky, C., "Improving well cementing quality with an environmentally preferred multifunctional polymer", in SPE Europec/EAGE Annual Conference, Society of Petroleum Engineers., (2012).

9.      Shanbhag, R., Melrose, Z., Nutt, S., Cleveland, M. and Keese, R., "Thermosetting polymer based flexible synthetic cement for successful zonal isolation in thermal wells–a new approach", in SPE Thermal Well Integrity and Design Symposium, Society of Petroleum Engineers., (2015).

10.    Zhong, S. and Chen, Z., "Properties of latex blends and its modified cement mortars", Cement and Concrete Research,  Vol. 32, No. 10, (2002), 1515-1524.

11.    Marar, K., "Effect of cement content and water/cement ratio on fresh concrete properties without admixtures", International Journal of Physical Sciences,  Vol. 6, No. 24, (2011), 5752-5765.

12.    Reddy, V.M., Rao, M., Srilakshmi, P. and Kumar, S., "Effect of w/c ratio on workability and mechanical properties of high strength self compacting concrete (m70 grade)", IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE),  Vol. 11, No. 5, (2014), 15-21.

13.    Wong, H. and Buenfeld, N., "Determining the water–cement ratio, cement content, water content and degree of hydration of hardened cement paste: Method development and validation on paste samples", Cement and Concrete Research,  Vol. 39, No. 10, (2009), 957-965.

14.    Singh, S., Munjal, P. and Thammishetti, N., "Role of water/cement ratio on strength development of cement mortar", Journal of Building Engineering,  Vol. 4, (2015), 94-100.

15.    Vorderbruggen, M., Bryant, S. and Bottiglieri, A., "Reducing cementing blend complexity: A single biopolymer capable of replacing multiple cement additives", in SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers. (2016).

16.    Choolaei, M., Rashidi, A.M., Ardjmand, M., Yadegari, A. and Soltanian, H., "The effect of nanosilica on the physical properties of oil well cement", Materials Science and Engineering: A,  Vol. 538, (2012), 288-294.

17.    Bach, D. and Vijn, P., "Environmentally acceptable cement fluid loss additive", in SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production, Society of Petroleum Engineers., (2002).

18.    Backe, K., Skalle, P., Lile, O., Lyomov, S., Justnes, H. and Sveen, J., "Shrinkage of oil well cement slurries", Journal of Canadian Petroleum Technology,  Vol. 37, No. 09, (1998).

19.    Lacuve, M., Chougnet, A., Allouche, M. and Mazard, C., "A method to improve adhesion strength at the cement/steel-casing interface and its effect on cement evaluation log response", in Offshore Mediterranean Conference and Exhibition, Offshore Mediterranean Conference., (2015).

20.             Newhall, C.C., "Improving cement bond in the appalachian basin with adjustments to preflush and spacer design", in SPE Eastern Regional Meeting, Society of Petroleum Engineers., (2006).

Download PDF 

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir