IJE TRANSACTIONS B: Applications Vol. 30, No. 11 (November 2017) 1800-1806   

PDF URL: http://www.ije.ir/Vol30/No11/B/23.pdf  
downloaded Downloaded: 13   viewed Viewed: 134

H. Wang, Z. -C. Guan, Y. -C. Shi, Y. -W. Liu and D. -Y. Liang
( Received: June 25, 2017 – Accepted in Revised Form: September 08, 2017 )

Abstract    The study of rotary steering drilling technology is currently one of the hot topics in the drilling engineering field. It requires accurate well trajectory control instructions when rotary steerable tools are applied to achieve the well trajectory control goal. A drilling trajectory prediction model will benefit this progress. According to the continuous beam theory, a mechanical model of push-the-bit rotary steerable bottom hole assembly (RSBHA) was established to characterize the bit steering property. The relation of bit lateral force and bit tilt angle with the influencing parameters such as borehole parameters and drilling operation parameters was obtained. Then further considering the bit cutting anisotropy, the drilling trajectory prediction model was built which quantitatively estimated the variation of inclination and azimuth angle. The model calculation result showed a consistency with the field experimental data proving the prediction model is reasonable in theory and feasible in engineering. This study could provide guidance for selecting the steering parameters to meet the control goal.


Keywords    Rotary Steering, Steering Force, Mechanical Properties, Bit Cutting Anisotropy, Drilling Tendency


چکیده    مطالعه تکنولوژی حفاری چرخشی در حال حاضر یکی از موضوعات داغ در زمینه مهندسی حفاری است. زمانی که هدف دستیابی به مسیر صحیح است ابزار چرخشی نیاز به دستورالعمل های مسیریابی دقیق دارد. یک مدل پیش بینی مسیر حفاری به این پیشرفت کمک خواهد کرد. با توجه به تئوری اشعه پیوسته، یک مدل مکانیکی (RSBHA) برای مشخص کردن ویژگی فرمان مته ایجاد شد. رابطه نیروی جانبی مته و زاویه شیب مته با پارامترهای تأثیرگذار مانند پارامترهای دیواره چاه و پارامترهای عملیات حفاری بدست آمد. سپس با توجه به ناهمسانگردی برش مته، مدل پیش بینی مسیر حفاری ساخته شد که تغییرات زاویه و جهت را به صورت کمی محاسبه می کرد. نتایج محاسبات مدل سازگاری خوبی با داده های تجربی میدانی داشت که نشان می دهد مدل پیش بینی کننده منطقی است و استفاده از آن در محاسبات مهندسی امکان پذیر است. این مطالعه می تواند راهنمای خوبی جهت تعیین پارامترهای فرماندهی برای دستیابی به هدف کنترل باشد.


1.      Cheraghi Kootiani, R., "Investigation of a powerful tool for the development of thinly bedded carbonate reservoirs", International Journal of Engineering, Transactions C: Aspects,  Vol. 27, No. 12, (2014), 1945-1952.

2.      Biscaro, E., D'Alessandro, J.D., Moreno, A., Hahn, M., Lamborn, R., Al-Naabi, M.H. and Bowser, A.C., "New rotary steerable drilling system delivers extensive formation evaluation for high build rate wells", in SPE Western Regional Meeting, Society of Petroleum Engineers., (2015).

3.      Marck, J. and Detournay, E., "Influence of rotary-steerable-system design on borehole spiraling", SPE Journal,  Vol. 21, No. 01, (2016), 293-302.

4.      Carpenter, C., "Field testing a new rotary-steerable-drilling-liner technology", Journal of Petroleum Technology,  Vol. 66, No. 12, (2014), 114-116.

5.      Wei, J., Shiquan, J., Xinsheng, F. and Ping, C., "Application of rotary steering drilling technology and its research progress", Natural Gas Industry,  Vol. 4, (2013), 15-23.

6.      Karlsson, H. and Brassfield, T., "Performance drilling optimization", in SPE/IADC Drilling Conference, Society of Petroleum Engineers., (1985).

7.      Xiu-shan, L., "Study on the geometric build angle rate of steerable motor", Acta Petrolei Sinica,  Vol. 6, (2004).

8.      Birades, M. and Fenoul, R., "Orphee 2d: A microcomputer program for prediction of bottomhole assembly trajectory", Symposlum on Petroleum Industry Application of Microcomputers of the Society of Petroleum Engineers, SPE,  Vol. 15285, (1986), 31-38.

9.      Yinao, S., "A method of limiting curvature and its applications [j]", Acta Petrolei Sinica,  Vol. 3, (1997).

10.    Menand, S., Sellami, H., Simon, C., Besson, A. and Da Silva, N., "How bit profile and gauge affect well trajectory", Journal of Petroleum Technology,  Vol. 54, No. 12, (2002), 40-41.

11.    Pastusek, P.E., Brackin, V.J. and Lutes, P.J., "A fundamental model for prediction of hole curvature and build rates with steerable bottomhole assemblies", in SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers., (2005).

12.    Heydari, H., Ghazavi, M., Najafi, A. and Rahmanian, S., "Nonlinear dynamics of the rotational slender axially moving string with simply supported conditions", International Journal of Engineering-Transactions C: Aspects,  Vol. 29, No. 6, (2016), 834-842.

13.    Jinzhou, Z. and Mingxin, S., "Analysis of the working mode of the rotary steering drilling system", China Petroleum Machinery,  Vol. 32, No. 6, (2004), 73-75.

14.    Xia, Y., Guan, Z.-C. and Shi, Y.-c., "Evaluation method of parameters design for bottom hole assembly", Shiyou Daxue Xueban: Ziran Kexue Ban(Journal of the University of Petroleum, China: Natural Science Edition)(China),  Vol. 29, No. 4, (2005), 48-51.

15.    Tang, X., Su, Y. and Li, T., "Bha mechanical analysis for rotary steering drilling system", Mechanics in Engineering,  Vol. 1, (2013), 55-59.

16.    Shuai, J., Lv, Y.-M. and Cai, Q.-K., "A three dimensional computer model of directional drilling", Journal of China University of PetroleumEdition of Natural Science,  Vol. 14, No. 5, (1990), 26-31.

17.    Shi, Y.-C., Guan, Z.-C., Zhao, H.-S. and Huang, G.-L., "A new method for build-up rate prediction of bottom-hole assembly in well drilling", Journal of China University of Petroleum (Edition of NaturalScience),  Vol. 41, No. 1, (2017), 85-89.

18.    Morenov, V. and Leusheva, E., "Development of drilling mud solution for drilling in hard rocks", International Journal of Engineering, Transactions A: Basics,  Vol. 30, No. 4, (2016), 620-626.

19.    Shao, D., Guan, Z., Wen, X. and Shi, Y., "Experiment on lateral vibration characteristics of horizontal rotary drilling string", Journal of China University of Petroleum,  Vol. 37, No., (2013), 100-105.

20.             Shao, D.-D., Guan, Z.-C., Wen, X. and Shi, Y.-C., " Experimental study on bit side force and drilling tendency in a horizontal well using rotary drilling technique ", Journal of China University of Petroleum (Edition of NaturalScience),  Vol. 38, No. 3, (2013), 61.

Download PDF 

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir