Abstract




 
   

IJE TRANSACTIONS B: Applications Vol. 32, No. 2 (February 2019) 286-295    Article in Press

PDF URL: http://www.ije.ir/Vol32/No2/B/14-3017.pdf  
downloaded Downloaded: 30   viewed Viewed: 62

  PERFORMANCE ANALYSIS OF A NOVEL THREE-PHASE AXIAL FLUX SWITCHING PERMANENT MAGNET GENERATOR WITH OVERLAPPING CONCENTRATED WINDING
 
H. Fekri, M. A. Shamsi-Nejad and S. M. Hasheminejad
 
( Received: October 11, 2018 – Accepted in Revised Form: January 03, 2019 )
 
 

Abstract    This paper proposes a novel axial flux switching permanent magnet generator for small wind turbine applications. Surface mounted axial flux switching permanent magnet (SMAFSPM) machine is a new type of these machines that is introduced in this paper. One of the most important challenges in optimal designing of this kind of machines, is ease of construction and maintenance. One of the main features of this machine is putting the magnets on the surface, which makes the construction of the machine easier. The overlapped three-phase winding improves the quality of voltages and power of the machine.To reach the optimum dimensions of machine, centeral composite design (CCD) and response surface methodology (RSM) combined with 3D finite element methods have been used.

 

Keywords    Wind energy ,Permanent magnet generator ,Flux switching machine ,Design of experiments(DOE) ,Response surface method(RSM)

 

چکیده   

در این مقاله یک ژنراتور مغناطیس دائم شار سوئیچینگ دیسکی برای کاربرد توربین های بادی پیشنهاد شده است. مزیت مدل پیشنهادی استفاده از آهنربای سطحی در ساختمان ماشین است که هزینه ساخت آن را نسبت به دیگر ماشین های شار سوئیچینگ دیسکی کاهش می دهد. همچنین برای بهبود عملکرد ماشین روش سیم پیچی هم پوشانی پیشنهاد گردیده است و تأثیر موارد پیشنهاد شده بر روی عملکرد ماشین از جمله سطح ولتاژ، هارمونیک ولتاژ و گشتاور دندانه با استفاده از تحلیل المان محدود سه بعدی تحقیق و بررسی گردیده. برای بهینه سازی با استفاده از طرح مرکب مرکزی (CCD) از روش های پاسخ سطح (RSM) ضمن بررسی عوامل مؤثر بر نیروی محرکه الکتریکی (EMF) و گشتاور دندانه، ابعاد ماشین بهینه سازی شده است.

References   

1. Patel, A.N. and Suthar, B.N., "Design optimization of axial flux surface mounted permanent magnet brushless dc motor for electrical vehicle based on genetic algorithm", International Journal of Engineering, Transactions A: Basics,  Vol. 31, No. 7, (2018), 1050-1056.
2. Kahourzade, S., Mahmoudi, A., Ping, H.W. and Uddin, M.N., "A comprehensive review of axial-flux permanent-magnet machines", Canadian Journal of Electrical Computer Engineering,  Vol. 37, No. 1, (2014), 19-33.
3. Daghigh, A., Javadi, H. and Torkaman, H., "Design optimization of direct-coupled ironless axial flux permanent magnet synchronous wind generator with low cost and high annual energy yield", IEEE Transactions on Magnetics,  Vol. 52, No. 9, (2016), 1-11.
4. Zhu, Z. and Howe, D., "Electrical machines and drives for electric, hybrid, and fuel cell vehicles", Proceedings of the IEEE,  Vol. 95, No. 4, (2007), 746-765.
5. Kim, J.S., Lee, J.H., Song, J.-Y., Kim, D.-W., Kim, Y.-J. and Jung, S.-Y., "Characteristics analysis method of axial flux permanent magnet motor based on 2-d finite element analysis", IEEE Transactions on Magnetics,  Vol. 53, No. 6, (2017), 1-4.
6. Kouhshahi, M.B., Bird, J.Z., Acharya, V., Li, K., Calvin, M. and Williams, W., "An axial flux-focusing magnetically geared motor", in Energy Conversion Congress and Exposition (ECCE), IEEE, 307-313 ., (2017)
7. Xia, B., Shen, J.-X., Luk, P.C.-K. and Fei, W., "Comparative study of air-cored axial-flux permanent-magnet machines with different stator winding configurations",  IEEE Transactions on Industrial Electronics,  Vol. 62, No. 2, (2015), 846-856.
8. Shao, L., Hua, W., Zhu, Z., Zhu, X., Cheng, M. and Wu, Z., "A novel flux-switching permanent magnet machine with overlapping windings", IEEE Transactions on Energy Conversion,  Vol. 32, No. 1, (2017), 172-183.
9. Kim, J.H., Choi, W. and Sarlioglu, B., "Closed-form solution for axial flux permanent-magnet machines with a traction application study", IEEE Transactions on Industry Applications,  Vol. 52, No. 2, (2016), 1775-1784.
10. Parviainen, A., Pyrhonen, J. and Kontkanen, P., "Axial flux permanent magnet generator with concentrated winding for small wind power applications", in Electric Machines and Drives, 2005 IEEE International Conference on,1191-1187, (2005)
11. Liu, X., Wang, M., Chen, D. and Xie, Q., "A variable flux axial field permanent magnet synchronous machine with a novel mechanical device", IEEE Transactions on Magnetics,  Vol. 51, No. 11, (2015), 1-4.
12. Taran, N. and Ardebili, M., "A novel approach for efficiency and power density optimization of an axial flux permanent magnet generator through genetic algorithm and finite element analysis", in Industrial Electronics (ISIE), 2014 IEEE 23rd International Symposium on, 709-714, (2014)
13. Saifee, A.H., Mittal, A., Laxminarayan, S.S. and Singh, M., "Design of a novel field controlled constant voltage axial flux permanent magnet generator for enhanced wind power extraction", IET Renewable Power Generation,  Vol. 11, No. 7, (2017), 1018-1025.
14. Hao, L., Lin, M., Xu, D., Fu, X. and Zhang, W., "Static characteristics of a novel axial field flux-switching permanent magnet motor with three stator structures", IEEE Transactions on Magnetics,  Vol. 50, (2014), 1-4.
15. Zhang, W., Liang, X. and Lin, M., "Analysis and comparison of axial field flux-switching permanent magnet machine with three different stator cores", IEEE Transactions on Applied Superconductivity,  Vol. 26, No. 7, (2016), 1-6.
16. Lin, M., Hao, L., Li, X., Zhao, X. and Zhu, Z., "A novel axial field flux-switching permanent magnet wind power generator", IEEE Transactions on Magnetics,  Vol. 47, No. 10, (2011), 4457-4460.
17. Kim, J.H., Li, Y. and Sarlioglu, B., "Novel six-slot four-pole axial flux-switching permanent magnet machine for electric vehicle", IEEE Transactions on Transportation Electrification,  Vol. 3, No. 1, (2017), 108-117.
18. Fernando, N., Vakil, G., Arumugam, P., Amankwah, E., Gerada, C. and Bozhko, S.J.I.T.o.I.E., "Impact of soft magnetic material on design of high-speed permanent-magnet machines", IEEE Transactions on Industrial Electronics, Vol. 64, No. 3, (2017), 2415-2423.
19. Hao, L., Lin, M., Li, W., Luo, H., Fu, X. and Jin, P., "Novel dual-rotor axial field flux-switching permanent magnet machine", IEEE Transactions on Magnetics,  Vol. 48, No. 11, (2012), 4232-4235.
20. Zhao, W., Lipo, T.A. and Kwon, B., "A novel dual-rotor, axial field, fault-tolerant flux-switching permanent magnet machine with high-torque performance", IEEE Transactions on Magnetics,  Vol. 51, No. 11, (2015), 4-10.
21. Wang, Y., Chen, M., Ching, T. and Chau, K., "Design and analysis of a new hts axial-field flux-switching machine", IEEE Transactions on Applied Superconductivity,  Vol. 25, No. 3, (2015), 1-5.
22. Zhang, W., Lin, M., Xu, D., Fu, X. and Hao, L., "Novel fault-tolerant design of axial field flux-switching permanent magnet machine", IEEE Transactions on Applied Superconductivity,  Vol. 24, No. 3, (2014), 1-4.
23. Liu, X., Diao, Y., Zhang, C., Chen, D., Zuo, L. and Yi, L., "Design optimisation of an axial flux-switching hybrid excitation synchronous machine at no-load", IET Electric Power Applications,  Vol. 8, No. 9, (2014), 342-348.
24. Zhao, J., Lin, M. and Xu, D., "Minimum-copper-loss control of hybrid excited axial field flux-switching machine", IET Electric Power Applications,  Vol. 10, No. 2, (2016), 82-90.
25. Zhang, W., Liang, X., Lin, M., Hao, L. and Li, N., "Design and analysis of novel hybrid-excited axial field flux-switching permanent magnet machines", IEEE Transactions on Applied Superconductivity,  Vol. 26, No. 4, (2016), 1-5.
26. Syed, Q.A.S., Kurtović, H. and Hahn, I., "New single-phase flux switching axial flux permanent magnet motor", IEEE Transactions on Magnetics,  Vol. 53, No. 11, (2017), 1-5.
27. Hao, L., Lin, M., Xu, D. and Zhang, W., "Cogging torque reduction of axial field flux-switching permanent magnet machine by adding magnetic bridge in stator tooth", IEEE Transactions on Applied Superconductivity,  Vol. 24, No. 3, (2014), 1-5.
28. Hao, L., Lin, M., Xu, D., Li, N. and Zhang, W., "Cogging torque reduction of axial-field flux-switching permanent magnet machine by rotor tooth notching", IEEE Transactions on Magnetics,  Vol. 51, No. 11, (2015), 1-4.
29. Xu, D., Lin, M., Fu, X., Hao, L., Zhang, W. and Li, N., "Cogging torque reduction of a hybrid axial field flux-switching permanent-magnet machine with three methods", IEEE Transactions on Applied Superconductivity,  Vol. 26, No. 4, (2016), 1-5.
30. Hao, L., Lin, M., Xu, D., Li, N. and Zhang, W., "Analysis of cogging torque reduction techniques in axial-field flux-switching permanent-magnet machine", IEEE Transactions on Applied Superconductivity,  Vol. 26, No. 4, (2016), 1-5.
31. Fekri, H. and HashemiNejad, S.M., "No load performance of a novel synchronous permanent magnet generator with soft magnetic composite", International Journal of Emerging Technology and Advanced Engineering,  Vol. 5, No. 3, (2015), 24-29.
32. Nejad, S.M.H. and Fekri, H., "Switching permanent magnet generator for small wind turbine ", International Journal of Inventive Engineering and Sciences,  Vol. 2, No. 10, (2014), 5-8.
33. Kazemian, M.E., Ebrahimi-Nejad, S. and Jaafarian, M., "Experimental investigation of energy consumption and performance of reverse osmosis desalination using design of experiments method", International Journal of Engineering, Transactions A: Basics,  Vol. 31, No. 1, (2018), 79-87.
34. Zhang, C., Chen, Z., Mei, Q. and Duan, J., "Application of particle swarm optimization combined with response surface methodology to transverse flux permanent magnet motor optimization", IEEE Transactions on Magnetics,  Vol. 53, No. 12, (2017), 1-7.
35. Beigi, H. and Cheshmeh, M., "Design, optimization and fem analysis of a surface-mounted permanent-magnet brushless dc motor", International Journal of Engineering, Transactions B: Applications  Vol. 31, No. 2, (2018), 339-345.
36. Patel, A. and Suthar, B.J.I.J.O.E., "Design optimization of axial flux surface mounted permanent magnet brushless dc motor for electrical vehicle based on genetic algorithm", International Journal of Engineering, Transactions A: Basics, Vol. 31, No. 7, (2018), 1050-1056.
37. Studer, C., Keyhani, A., Sebastian, T. and Murthy, S., "Study of cogging torque in permanent magnet machines", in Industry Applications Conference, 1997. Thirty-Second IAS Annual Meeting, IAS'97., Conference Record of the 1997 IEEE, (1997), 42-49.
38. Wu, Z., Zhu, Z. and Zhan, H., "Comparative analysis of partitioned stator flux reversal pm machines having fractional-slot nonoverlapping and integer-slot overlapping windings", IEEE Transactions on Energy Conversion,  Vol. 31, No. 2, (2016), 776-788. 


Download PDF 



International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir