Abstract




 
   

IJE TRANSACTIONS A: Basics Vol. 21, No. 4 (November 2008) 329-346   

PDF URL: http://www.ije.ir/Vol21/No4/A/2-936.pdf  
downloaded Downloaded: 101   viewed Viewed: 1754

  SUBSTRUCTURE MODEL FOR CONCRETE BEHAVIOR SIMULATION UNDER CYCLIC MULTIAXIAL LOADING
 
 
A. A. Khosroshahi and S. A. Sadrnejad*

Department of Civil Engineering, K.N. Toosi University of Technology
P.O. Box 15878-4416, Tehran, Iran
a.khosroshahi@sazeh.co.ir - sadrnejad@kntu.ac.ir

* Corresponding Author
 
 
( Received: August 17, 2007 – Accepted in Revised Form: May 09, 2008 )
 
 

Abstract    This paper proposes a framework for the constitutive model based on the semi-micromechanical aspects of plasticity, including damage progress for simulating behavior of concrete under multiaxial loading. This model is aimed to be used in plastic and fracture analysis of both regular and reinforced concrete structures, for the framework of sample plane crack approach. This model uses multilaminated framework with sub-loading surface to provide isotropic and kinematics hardening/softening in the ascending/descending branches of loading. In multilaminated framework a relation between stress/strain and yield function on planes of various orientation is defined and stress/strain path history for each plane is kept for a sequence of future analysis. Four basic stress states including compression-shear with increase/decrease in the compression/shear ratio,tension-shear and pure compression are defined and the constitutive law for each plane is derived from the most influenced combination of stress states. With using sub-loading aspect of the surface, the kinematics and isotropic hardening are applied to the model to make it capable of simulating the behavior under any stress path, such as cyclic loading in the ascending/descending branch of loading. Based on the experimental results of the literature, the model parameters are calibrated. The model results under monotonic loading and also different states of cyclic loadings such as uniaxial compression, tension, alternate compression tension, shear and triaxial compression are compared with experimental results that shows the capability of the model.

 

Keywords    Concrete, Multilaminate, Microplane, Elastoplastic, FEM, Substructure, Fracture

 

References   

1. Taylor, G. I. “Plastic Strain in Metals”, J. of Industrial Metals, Vol. 62,(1938), 307-324.

2. Batdorf, S. B. and Budiansky, B., “A Mathematical Theory of Plasticity Based on the Concept of Slip”, National Advisory Committee for Aeronautics, TN 1871, (1949).

3. Zienkewics, O. C. and Pande, G. N., “Time Dependent Multi-Laminate Model of Rocks-A Numerical Study of Deformation of Rock Masses”, Int. J. of Numerical and Analytical Methods in Geomechanics, (1977), 219-247.

4. Pande, G.N. and Sharma, K. G., “Multilaminate Model of Clays-A Numerical Evaluation of the Influence of Rotation of Principal Stress Axes”, Int. J. for Numerical and Analyt. Meth. in Geomech, (1983), 397-418

5. Bazant, Z. P. and Oh, B. H., “Microplane Model for Fracture Analysis of Concrete Structures”, Proceeding Symposium on the International of Non-Nuclar Munitions with Structures, Us Air force Academy, (1983), 49-53.

6. Sadrnejad, S. A. and Pande, G. N., “A Multilaminate Model for Sands”, Proceeding of 3rd International Symosium on Numerical Models in Geomechanics, NUMOG III, Niagara Fall, Canada, (1989), 8-11.

7. Sadrnejad, S. A., “A Sub-Loading Surface Multilaminate Model for Elastic Plastic Porous Media”, International Journal of Engineering, Vol. 15, No.4, (2002), 315-324.

8. Hashiguchi, K., “Elastoplastic Constitutive Equations with Extended Low Rules”, J. Fac. Agr., Kyushu University, No. 38, (1994), 279-286.

9. Hashiguchi, K., “Guide-manual for Elastoplastic Constitutive Models Comparison of Elastoplastic Constitutive Models Emphasizing on Subloading Surface Model and Bounding Surface Model”, http://www.Mech.Bpes.Kyushu-U.Ac.Jp/Index-E.Htm, Kyushu University website, (2005).

10. Bresler, B. and Pistler, K. S., “Strength of concrete under combined stresses”, J. of Am.Conc. Inst., Vol. 551, No. 9, (1958), 321-345.

11. Goode, C. D. and Helmy, M. A., “The Strength of Concrete Under Combined Shear and Direct Stress”, Mag. of Conc. Research, Vol. 19, No. 59, (1967), 179-200.

12. Tasuji, M. E., Slate, F. O. and Nilson, A. H., “Stress-Strain Response and Fracture of Concrete in Biaxial Loading”, ACI J., (July 1978), 306-312.

13. Van Mier, J. G., “Multiaxial Strain Softening of Concrete”, J. of Mat. and Fracture, Vol. 111, No. 19, 179-200.

14. Peterson, P. E., “Crack Growth and Development of Fracture Zone in Plain Concrete and Similar Materials”, Rep. No. TVBM1006 Lund Institute of Technology, Sweden, (2001).

15. Sfer, D., Carol, I., Gettu, R. and Este, G., “Study of the Behavior of Concrete Under Triaxial Compression”, ASCE-J. of Eng. Mech., Vol. 128, No. 2, (2002), 156-163.

16. Sinha, B. P.,Gerstel, K. H. and Tulin, L. G., “Stress-Strain Relations for Concrete Under Cyclic Loading”, J. Am. Conc. Inst, Vol. 62, No. 2, (1964), 195-210.

17. Reinhardt, H. W. and Cornelissen, H. A. W., “Post-Peak Cyclic Behaviour of Concrete in Uniaxial Tensile and Alternating Tensile and Compressive Loading”, Cement and Concrete Research, Vol. 14, (1984), 263-270.

18. Eligenhausen, R., Popov, E. P. and Bertero, V. V, “Local Bond Stress-Slip Relationships of Deformed Bars Under Generalized Excitations”, Eartquake Engineering Research Center, College of Engineering, University of California, Bekeley, C.A. Report No. UCB/EERC-83/23, (1983).

19. Bazant, Z. P., Xiang, Y., Adley, M., Prat, P. C. and Akers, S., “Microplane Model for Concrete II, Data Delocalization and Verification”, J. of Eng. Mech. ASCE, Vol. 3, (1996), 263-268.

20. Hurlbert, B. J., “Experimental and Computational Investigation of Strain Softening in Concrete”, Report AFOSR 80-0273, US Air Force Office of Scientific Research, University of Colorado, Boulder, U.S.A., (1985).

21. Scavuzzo, R., Stancowski, T., Gerstle, K. and Ko, H. Y., “Stress-Strain Curves for Concrete Under Multiaxial Load Histories”, NSF CME 80-01508 Dep. Of CEAE, University of Colorado, Boulder, U.S.A., (1983).


Download PDF 



International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir